Hyper Open Edge Cloud

How To Setup AW2S RRH And Tiogapass BBU

How To Setup AW2S RRH And Tiogapass BBU
  • Last Update:2023-11-07
  • Version:001
  • Language:en

Power on Tiogapass in the rack

You can refer
HowTo Physically Install ESA Kit and OCP Servers 
to setup the rack. 

Please also connect the network to the Tiogapass with the RJ45 cable.

Connect antennas to RF attenuators 

Connect antennas to the output of the RF attenuators.

Note: the antennas in the picture are for demonstration, please use a proper antennas in formal use.

Connect antennas to RF attenuators 

Ensure that the antennas are connected to the output of the RF attenuators.

Connect AW2S RRH to RF attenuators 

Connect AW2S RRH to the input of the RF attenuators. Ensure that the AW2S RRH are connected to the input of the RF attenuators.

Connect AW2S RRH

Connect AW2S RRH to the input of the RF attenuators with ANT ports. 

Connect the SFP+ cable between the leftmost port of CPRI on AW2S RRH (as shown in the picture) and the rightmost port of CPRI on Tiogapass (as shown in the next picture).

Power on the AW2S RRH with the grey cable as shown in the picture.

Connect AW2S RRH to Tiogapass

Connect the SFP+ cable between the leftmost port of CPRI on AW2S RRH (as shown in the previous picture) and the rightmost port of CPRI on Tiogapass (as shown in the picture).

Power on the AW2S RRH

Power on the AW2S RRH with the power supply.